How To Deal With The Fault Caused By ThReducer e Planetary Heating?

There are many faults caused by planetary reducers, and the faults caused by heat are the most common. The reducer sometimes has some unexpected problems, that is, its temperature may be too high and cause malfunctions. Too high temperature will cause many problems, which not only affects its efficiency, but even damages the reducer in severe cases. Therefore, Zhongdalide teaches you how to eradicate the problem of excessive temperature of the reducer. Provide some methods and tips.

First, if the cycloidal pinwheel reducer is hot during use and the temperature is too high, generally speaking, this may be a problem with the eccentric bearing and a malfunction. Of course, this is only a general situation, and other factors should also be considered. For example, if the machine is newly purchased, there may be unreasonable parts in the assembly, or there may be problems. Of course, this knowledge is the first reaction to be formed in the mind after discovering the temperature fault of the reducer, but this does not mean that the problem is due to this reason. For the temperature problem of the cycloid reducer, there may be another important factor that needs to be considered, that is, the problem of lubricating oil. If the reducer lacks lubricating oil, the above problems may also exist. This needs to prescribe the right medicine and adapt the measures to local conditions.

Again, there are some other reasons that need to be considered. If the cycloid reducer is often overloaded, it may also cause the temperature to be too high, but these factors need to be analyzed and eliminated to find the most correct answer. . The cleaning problem of the planetary reducer is also a problem that cannot be ignored. Therefore, the gearbox cleaning and maintenance machine uses the original oil supply and discharge system of the gearbox and the filtered old oil to realize the cleaning of the gearbox, rapid filtration and refilling of waste oil. New oil and other functions can better reduce the problem of heat generation of the reducer. The reason why the temperature of the cycloid reducer is too high has been found, and then there are solutions. There are many solutions to things, but the most straightforward and simplest, and the most reasonable, should be the best method, which belongs to deceleration. The basic theory of machine technology will not be stated too much here.

Things to note:

In addition to handling and understanding, the most important thing is to return to the root of the problem and pay attention to use. If there is a problem with the reducer, you must first find out the reasons, such as the above-mentioned possibilities. If these reasons are eliminated, then look for other factors that may affect the temperature of the reducer, and then prescribe the right medicine and give a solution.